Used Pipe Uses and Applications

Used steel pipe is simply structural steel in a tubular form. The outside diameter of this steel pipe can be from 1/2" all the way to 48". The wall of the pipe can be of virtually any thickness. Structural usage means to use in structural methods as in construction of structures such as foundations, bulkheads, or anything that might need to be shored up or needing to have a dense under girding and to add more strength.

Other uses for used steel pipe can be for building flagpoles, poles for signs, fence posts as well as fence railings, bridge railings, culverts for roads and walkways over ditches. Much pipe has been used in Canada for the purpose of “H" frames to allow the pipe to be lifted up above ground level so as not to disturb the frozen tundra as well as crossing rivers and ravines.

Piling is one of the principle uses for used steel pipe. Piling is the foundation on which structures might lay and are “piled" with the use of large piling hammers to sink the piles into the ground, river bed, or ocean, bay, or canal floor in order to bulk up a dock or bank to prevent erosion and give strength.

In the oil fields, large amounts of used pipe of this same structural nature are used to set “surface casing". This is the pipe used in oil and gas wells to set at shallow depths near the surface to protect water sands from contamination or leakage of drilling fluids from the oil or gas drilling project. Rat holes and mouse holes are smaller forty to sixty foot holes on drilling rigs used to set off the drilling apparatus when a new section down hole is completed. Forty to sixty feet of 14", 16", or 20" is used on almost every well drilled anywhere.

Many pipelines are excavated, rehabilitated and put back into service as pipelines. At times the integrity of the steel is the same as when it was new and sometimes it can only be used in lesser applications such as lower pressured transportation. Crude oil pipelines can be changed over to gas, gas to oil, gas to water, etc. There is a movement in part of the western U.S to change over pipelines of any sort to transporting of cable for electricity generated from wind turbines. Many have been used for fiber optic cable transfers.

In the United States, when crude oil pipelines were no longer of use where they were located because of depletion of oil in the field they were serving, they were simply excavated and moved to other locations. This was especially the case when the U.S. was engaged in World War II.

Still other uses are for road boring. A road bore contractor might drill a borehole of diameter under a road or highway or river in order to form a casing to hold a smaller peace of pipe that is part of a pipeline going from one point to another.

The last resort is to scrap the pipe. It is generally reusable and can be recycled for many uses. After all it is still a grade of steel in tubular form and a commodity that can be used over and over.

Pipeline Equities has inventories of line pipe which have been in gas or crude oil use. All are excellent used pipe and can be used economically in a variety of applications. Some of this material is still in the ground, but can be excavated and prepared on order.

Call for prices and delivery at 713-623-0690.